Siemens SIPART DR24 User Manual

Manual
1 Technical Description
1.6 Technical Data
1.6.3 Technical Data of the Options Modules
SIP ART DR24 6DR2410
C79000-G7476-C153-03
105
6DR2804-8A/B Coupling relay 230 V
1 relay module 6DR2804-8B
2 relay modules 6DR2804-8A
per relay module 2 relays with 1 changeover contact each with
spark quenching element
- Contact material Silver-cadmium oxide
- Contact load capacity
Switching voltage
AC ≤ 250 V
DC ≤ 250 V
Switching current
AC ≤ 8A
DC ≤ 8A
Rating
AC ≤1250 VA
DC ≤ 30 W at 250 V
≤ 100 W at 24 V
- Service life
mechanical 2x10
7
Switching processes
electrical AC 230 V, ohmic 2x10
6
/I(A) switching processes
- Spark quenching element Series circuit 33 nF/220 Ω parallel to it
Varistor
420 V
rms
- Exciter winding
Voltage +19 at +30 V
Resistor 1.2 kΩ 180 Ω
- Electrical isolation between
Exciter winding -- Contacts Safe isolation
1)
by increased insulation,
Air and relay module -- relay module air and creep lines for overvoltage class III
(6DR2804-8A) and degree of contamination 2
Contact -- Contact of a relay module Safe isolation
1)
by increased insulation,
air and creep lines for overvoltage
class II and degree of contamination 2
- Type of protection
Housing IP50 according to DIN 40050
Connections (in plugged status) IP20 according to DIN 40050
- Housing material polyamide 66
- Mounting rail assembly on NS35/7.5 DIN EN 5002
NS35/15 DIN EN 50035
NS32 DIN EN 50035
- Dimensioned drawing see figure 1--44, page 106
1
)
according to DIN EN 61010 Part 1

Siemens SIPART DR24 Specifications

General

Brand	Siemens
Model	SIPART DR24
Category	Controller
Language	English