Siemens SIPART DR24 User Manual

Manual
9 List of Abbreviations
SIP ART DR24 6DR2410
C79000-G7476-C153-03
265
root root (b)
SA*.1 SES: Analog input 1 to 8, UN (sink, analog)
SA*.2 SES: Analog input 1 to 8, N (sink, digital)
SA*.3 SES: Analog input 1 to 8 (source)
SAA* SES: Analog output 1 to 8 (sink)
SbA* SES: Digital output 1 to 8 (sink)
SbE* SES: Digital input 1 to 8 (source)
SES Serial interface
SG* Controlling variable 1 to 3
SMAL Error message: small
Snr SES station number
StAt static
StP Switch steps
SUb Subtractor (b)
tA Parameter: Start of scale
tA*.* Key tA1 to tA7, output 1 to 6 (source)
tA*.U Key tA1 to tA7, switching (sink, digital)
tAE Minimum turn--on time
tACt Clock signal (source)
td Parameter dead time
tE Parameter: Full scale
tESt Test
tF Filter time constant
tFF T -flip-flop (b)
TG Delay time of the controlled system
tiME Timer , monoflop (b)
tin Integration time
tM Period
tn Integral action time
tS Parameter setpoint ramp
to to
tr Tracking time
tU Monitoring time
tv Derivative action time
tY Actuating time
vv Derivation gain
x Controlled variable
xdD Control difference D--element
xdI Control difference I--element
xdP Control difference P--element
xdS Control difference position controller
y Manipulated variable

Siemens SIPART DR24 Specifications

General

Brand	Siemens
Model	SIPART DR24
Category	Controller
Language	English