Need help?Do you have a question about the Siemens SIPROTEC 7UT635*-* N series and is the answer not in the manual?
General| Rated Current | 1 A or 5 A |
|---|---|
| Display | Graphical LCD |
| Frequency | 50/60 Hz |
| Communication Interfaces | Ethernet, USB |
| Communication Protocols | IEC 61850, Modbus, DNP3 |
| Protection Functions | Differential, Overcurrent, Overvoltage, Undervoltage, Thermal Overload |
| Differential Protection | Yes |
| Cyber Security | Role-based access control |
| Mounting Type | Flush mounting |
| Weight | 4 kg |
| Operating Temperature | -25 °C to +70 °C |
Describes the device's suitability for various protection tasks like transformers, generators, motors, and busbars.
Describes the main protective function based on current comparison and transformation ratios.
Details the definite and inverse time stages for phase and residual currents.
Prevents damage due to thermal overloading by calculating temperature rise.
Provides rapid back-up fault clearance when an assigned circuit breaker fails to respond.
Covers prerequisites, connection variants, and assignment of CTs/VTs for protected objects.
Provides guidelines and procedures for testing the device's functions and system integration.
Lists technical data and parameters related to the differential protection function.
Provides technical data for phase and residual current time overcurrent protection.
Includes technical data for thermal overload protection.
Details technical data for circuit breaker failure protection.
Provides connection examples for current and voltage transformers for different protected objects.
Lists parameter addresses, setting options, default settings, and comments for device configuration.
To Next Page