Siemens SIREMOBIL Compact L - Checking the operating voltages; Low voltages; I.I. voltages

Replacement of the 15" LCD Color TFT Display 19
Siemens AG SPR2-130.841.03 Page 19 of 20 Siremobil Compact L
Medical Solutions Rev. 02 06.05 CS PS 24
Storage of the parameters 1
• Scroll to the "Exit" menu with the "UP" and "DOWN" key
and select it by pressing the "Enter" key.
• The changed parameter values will be stored permanent.
Checks 1
• Switch off and on the display.
• Check the video mode as described in section "Checking the automatically detected
video mode".
• Check the Geometry as described in section "Geometry".
• Check the brightness, contrast and back light intensity as described in section
"Brightness, contrast and back light"
• Perform the work steps as described in section "Final work steps".