Siemens SIREMOBIL Iso-C Installation Instructions

SIREMOBIL SPR2-130.812.06 Page 2 of 6 Siemens AG
System Manual Rev. 01 12.02 CS PS 24 Medical Solutions
2 Installation and Startup1
Safety information 1
Validity of this document 1
This document is applicable if a key switch is to be retrofitted to the SIREMOBIL Compact,
SIREMOBIL Compact L, SIREMOBIL Iso-C, POWERMOBIL, and ARCOSKOP systems.
Documents required 1
• System manual of the product
Parts required 1
Tools required 1
• Tool case
• 1 set of Allen keys
• 1 drilling machine
• 1 vacuum cleaner
Measuring equipment required 1
Avoidance of light to severe injuries which may even lead to
death and avoidance of material damage.
The product-specific safety information given in the system man-
ual as well as the safety information contained in the ARTD,
part 2, must be observed.
After all work has been completed and all covers have been
attached, perform the protective conductor test according to
ARTD-002.731.17. The protective conductor resistance must not
exceed 0.2 Ohm.
• Retrofit kit key switch 07140895
• Protective conductor resistance meter
e. g. "Safety Tester Bender UNIMET 1000 ST", Mat. No. 51 38 727
WARNING

Siemens SIREMOBIL Iso-C Specifications

General

Brand	Siemens
Model	SIREMOBIL Iso-C
Category	Medical Equipment
Language	English