To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIREMOBIL and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Viewing Angle | 170° horizontal |
| Operating Temperature | 10°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 30% to 75% (non-condensing) |
Provides essential safety information and alerts for operating the equipment.
Explains the meaning of emphasized texts and safety alert icons used in documentation.
Specifies the validity period and applicable systems for these installation instructions.
Lists the necessary components, such as the upgrade kit, for the installation.
Identifies the tools and auxiliary equipment needed for the installation process.
Lists essential documents and manuals required for checking and settings.
Step-by-step guide to safely remove old monitors from the system.
Instructions for routing and connecting video and power cables for the new TFT displays.
Procedure for mounting the support arm onto the monitor trolley for the TFT displays.
Details on attaching the TFT display unit to the installed support arm.
Guidance on modifying the support arm dimensions to fit the specific TFT display.
Steps for physically mounting the TFT displays onto the support arm, including screw tightening.
Procedure for correctly connecting the protective ground wire for safety.
Instructions for connecting the cables for the radiation indicators on the support arm.
Steps for connecting power and video cables to the TFT displays.
Guidance on routing and securing cables neatly and safely within the system.
Details on performing checks and settings for the BARCO MVG 1318 TFT display.
Final steps including closing covers, testing ground wire, and system acceptance tests.
Notes changes made to the document, including deletion of specific display descriptions.
