Siemens SIREMOBIL - Installation of TFT Displays; Dismantling the Existing Monitors

2 - 1
Siemens AG SPR2-230.812.02 Page 1 of 8 SIREMOBIL
Medical Solutions Rev. 02 02.06 CS PS SP System Manual
Installation of TFT displays 2
Dismantling the existing monitors 2
• Remove both monitors as follows.
• Remove transport monitor covers (Fig. 1).
• Remove the shielding plates (Fig. 2).
• Remove the connection housing (only for SIMOMED N monitor 11 02 628, Fig. 3).
• Unplug all cables from the monitor to be replaced.
• In each case loosen the 2 screws at the monitor mounting (Fig. 4).
• Lift down both monitors.
• Reattach all previously removed parts to the monitor.
Fig. 1 Monitor cover Fig. 2 Shielding plate
Fig. 3 Connection housing Fig. 4 Monitor attachment
Mark for the keyboard tray
Mark for the keyboard tray