Siemens SIRIUS 3RW5 - Page 142

Appendix
A.2 Data tables
SIRIUS 3RW5 Modbus communication module
142 Equipment Manual, 03/2020, A5E43676481002A/RS-AC/003
A.2.6 I&M0 - device identification (3RW5 soft starter)
Only read access (r) to the device identification (I&M0) is possible via Function Codes 03
and 04.
Register
Content
Meaning
Access
Address
Quantity
hex
dec
0x0181
385
5
RESERVED
-
r
0x0186 390 1 MANUFACTURER_ID 42 = Manufacturer ID SIEMENS r
0x0187
391
10
ORDER_ID
Article number
r
0x0191 401 8 SERIAL_NUMBER Serial number r
0x0199
409
1
HARDWARE_REVISION
Product version
r
0x019A
410
2
SOFTWARE_REVISION
Firmware version
r
0x019C 412 1 REV_COUNTER Provides information about the
parameterized changes on the device.
r
0x019D 413 1 PROFILE_ID Gives information about the profile
supported by the device and the line of
products belonging to the device.
r
0x019E 414 1 PROFILE_SPECIFIC_TYPE Used to supplement the object
"PROFILE_ID" and contains further
information on the profile.
r
0x019F 415 1 IM_VERSION Provides information about the version of
the identification data
(0x0101 = Version 1.1).
r
0x01A0 416 1 IM_SUPPORTED Provides information about the available
identification data (Index 2 to 4).
r