To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIRIUS 3RW5 and is the answer not in the manual?
General| Product category | Soft starter |
|---|---|
| Product designation | SIRIUS 3RW5 |
| Protection class IP | IP20 |
| Overload relay function | Integrated |
| Communication | Yes |
| Type of communication | PROFIBUS, PROFINET |
| Control supply voltage | 24 V DC |
| Ambient temperature range | -25...+60 °C |
| Mounting type | DIN rail |
| Standards | UL 508, CSA 22.2 No. 14 |
Submit queries to Technical Assistance via the online request form.
Find further manuals and online helps for automation system components.
Information on industrial security functions and cyber threat protection.
Guidelines for preventing damage from electrostatic discharge to electronic devices.
Measures and threats related to data security in automated systems.
Instructions for environmentally friendly recycling and disposal of the device.
Overview of the physical components and interfaces of the communication module.
Details on supported EtherNet/IP functions and module features.
Describes options for data transfer and communication interfaces.
Explains different operating modes and how master control is managed.
Information on recommended bus connectors and connection requirements.
Information about the SIRIUS Soft Starter ES (TIA Portal) software.
Step-by-step guide for installing the module into the soft starter.
Procedure for safely removing the communication module from the soft starter.
Steps for connecting the bus connector to the communication module.
Steps for disconnecting the bus connector from the communication module.
Guide to setting up the soft starter within an EtherNet/IP network.
Procedures for configuring soft starters with or without HMI, including IP parameters.
Defines behavior and parameters for bus connection interruptions.
Explanation of device LEDs for status and diagnostics.
How to access soft starter diagnostics, measured, and statistic data.
Lists common errors and their corresponding remedies for the module.
Describes message bits indicating control source priority.
Procedure for updating the firmware of the device.
Steps for replacing the communication module and managing parameters.
How to reset the soft starter, communication module, or HMI to factory settings.
Guide to accessing technical data sheets and product information.
Information on finding CAx data for dimensioning and CAD.
Information on finding CAx data for circuit diagrams.
Explains how current values are coded in different formats.
Details examples of statistic data collected by the soft starter.
Describes how bytes are arranged for data storage ("little endian").
Defines terms and conventions used in the objects section.
Lists the CIP objects and 3RW5 objects supported by the module.
Provides information for identifying the EtherNet/IP device and general info.
Explains the CIP-defined object for transferring explicit messages.
Allows combining attributes into data structures for reading/writing.
Manages resources for cyclic and acyclic communication channels.
Manufacturer-specific CIP object for reading/writing device objects.
Mechanism for configuring the TCP/IP network interface and IP parameters.
Saves link-specific counters and status information for the IEEE 802.3 interface.
