Siemens SIRIUS 3RW5 - Removing the 3 RW5 communication module

Installing and removing
4.2 Removing the 3RW5 communication module in the 3RW5 soft starter
SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001
33
4.2 Removing the 3RW5 communication module in the 3RW5
soft starter
Requirements
● 3RW52 or 3RW55 soft starter
● Removed bus connector (Page 37)
● Screwdriver PH1
● Slotted screwdriver with blade width 5.5 to 8 mm
NOTICE
Damage to property due to electrical voltage
Switch off the power to the 3RW5 soft starter before starting work
(main and control supply voltage).
Note
A magnetic
screwdriver simplifies disassembly.