Siemens SIRIUS 3RW5 - Parameters; A.9.4 Parameters

Appendix
A.9 Dataset Object
SIRIUS 3RW5 EtherNet/IP communication module
92 Manual, 05/2019, A5E45131885002A/RS-AA/001
A.9.4 Parameters
Both read (get, r) and write (set, w) access to the parameters is possible. The Dataset Object
"parameter" is not supported by the 3RW52 soft starter.
The instance and attribute ID of all parameters is 25408 (0x6340).
Object
No.
Byte Bit Data
format
Parameters Range of values
[encoding]
Incre-
ment
3RW55
1)
[D
2)
]
- 273 ...
274
- - Reserved - - -
2313 275 0 Bit4 Automatic parameterization [0 ... 2] - r/w
[0]
[0] Off
[1] ON - with preset starting time
[2] ON - with preset starting time and
current limit
2315 277 0 UINT Preset starting time 0 … 360 s
[0 … 3 600]
0.1 s r/w
[100]
130 279 0 UDINT Rated operational current Ie - 0.01 A r/w
3)
SIRIUS 3RW55 soft starter,
High Performance, 13 A,
3-phase controlled, motor
overload protection, torque
control
2.5 … 22.5 A
[250 … 2 250]
0.01 A [250]
SIRIUS 3RW55 soft starter,
High Performance, 18 A,
3-phase controlled, motor
overload protection, torque
control
3.5 … 31.1 A
[350 … 3 110]
0.01 A [350]
SIRIUS 3RW55 soft starter,
High Performance, 25 A,
3-phase controlled, motor
overload protection, torque
control
5 … 43.3 A
[500 … 4 330]
0.01 A [500]
SIRIUS 3RW55 soft starter,
High Performance, 32 A,
3-phase controlled, motor
overload protection, torque
control
6.5 … 55.4 A
[650 … 5 540]
0.01 A [650]
SIRIUS 3RW55 soft starter,
High Performance, 38 A,
3-phase controlled, motor
overload protection, torque
control
7.5 … 65.8 A
[750 … 6 580]
0.01 A [750]
SIRIUS 3RW55 soft starter,
High Performance,
25 A / 690 V, 3-phase
controlled, motor overload
protection, torque control
5 … 43.3 A
[500 … 4 330]
0.01 A [500]