Siemens SIRIUS 3RW5 - Identity Object

Appendix
A.5 Identity Object
SIRIUS 3RW5 EtherNet/IP communication module
76 Manual, 05/2019, A5E45131885002A/RS-AA/001
A.5 Identity Object
The "Identity" object allows the identification of the EtherNet/IP device and also provides
general information via the EtherNet/IP device.
The following information applies to the Identity Object of the 3RW5 EtherNet/IP
communication module:
● Class code: 0x0001
● Class attributes: 1 ... 3
● Number of instances: 1
General services
Service code
Available service
Service
Description
Class
Instance
0x01
Yes
Yes
Get_Attributes_All
Supplies the contents of all attributes.
0x05 No Yes
Reset
-
0: Restart Performs a restart of the
3RW5 communication module.
1: Factory settings
Restores the factory settings.
0x0E
Yes
Yes
Get_Attributes_Single
Supplies the contents of one attribute.
Class attributes
Attribute ID
Access
Class attribute
Data type
1
Get
Revision
UINT
2
Get
Max Instance
UINT
3
Get
Number of Instance
UINT
Instance attributes
Attribute ID
Access
Instance attribute
Data type
Value / comment
1
Get
Vendor ID
UINT
0x04E3 (SIEMENS)
2
Get
Device Type
UINT
0x000C (Communication Adapter)
3
Get
Product Code
UINT
0x07D0
4 Get
Revision
STRUCT of
Firmware version Vx.y.z
Major Revision
USINT
Bit 7 ... 4 = x, bit 3 ... 0 = y
Minor Revision
USINT
Bit 7 ... 0 = z
5
Get
Status
WORD
See the table below
6
Get
Serial Number
UDINT
Bytes 3 to 6 of the MAC address
7 Get
Product Name
SHORT_STRING
-
Character string length
USINT
0x11 (17 characters)
ASCII character string
STRING
3RW59 ETHERNET IP