Configuring
6.2 Configuring the 3RW5 soft starter
SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001
43
6.2.1.2 Configuring 3RW5 soft starters with the aid of a 3RW5 HMI High Feature
Requirements
● Input device (3RW5 HMI High Feature, PC)
The 3RW5 EtherNet/IP communication module is supported by 3RW5 HMI High Feature
as from 3RW5 HMI High Feature V2.0.
● Switched on control supply voltage on the 3RW5 soft starter
Procedure
Programmable logic controller / scanner
PC or programming device with configuration software of controller
SIRIUS 3RW5 soft starter / adapter
PC with SIRIUS Soft Starter ES (TIA Portal)
3RW5 HMI High Feature (accessories depend on 3RW5 soft starter)
... : Steps to be taken in the procedure
To Next Page
Loading...
