Siemens SIRIUS 3RW5 - Installing and removing; Installing the 3 RW5 communication module

SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001
29
Installing and removing
4
4.1 Installing the 3RW5 communication module in the 3RW5 soft starter
Requirements
● 3RW5 soft starter
NOTICE
Damage to property due to electrical voltage
Switch off the power to the 3RW5 soft starter before starting work
(main and control supply voltage).
Procedure
1. Break out the cover of the slot (Page 30).
2. Mount the 3RW5 communication module (Page 32).
Result
You have mounted the 3RW5 communication module in the 3RW5 soft starter, which you
can connect to the fieldbus (Page 35) via the 3RW5 communication module.