SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001
19
You can equip SIRIUS soft starters of the 3RW5 series with an optional
3RW5 communication module and therefore also with network functionality. Using the
3RW5 communication module, you integrate the 3RW5 soft starters into the associated
network environment with their complete functionality.
The 3RW5 soft starters have a slot for fitting the 3RW5 communication modules.
Preconditions for using the 3RW5 communication modules on the 3RW5 soft starter
Note
3RW5 EtherNet/IP communication module
The 3RW5
EtherNet/IP communication module can be used on 3RW52 and
soft starters as from 3RW52 V2.0 and 3RW55 V2.0.
EtherNet/IP communication module is supported by 3RW5 HMI High Feature as
HMI High Feature V2.0.
When operating in an automation system:
● Programmable logic controller (PLC)
● PC / programming device with installed configuration software of controller
(e.g. Rockwell Studio 5000 with EDS file)
● Parameterization software (e.g. SIRIUS Soft Starter ES (TIA Portal), only possible via
local interface on the 3RW5 HMI High Feature) (optional)
Basic knowledge of the following areas:
● General electrical engineering
● Drive technology
● Automation technology
● Handling the automation system and the software used
To Next Page
Loading...
Need help?
General
