Siemens SIRIUS 3RW5 - Page 49

Mounting and dismantling
4.2 Removing the 3RW5 communication module from the 3RW5 soft starter
SIRIUS 3RW5 Modbus communication module
Equipment Manual, 03/2020, A5E43676481002A/RS-AC/003
49
4.2 Removing the 3RW5 communication module from the
3RW5 soft starter
Requirements
● 3RW52, 3RW55 or 3RW55 Failsafe soft starters
● Removed bus connector (Page 63) or removed bus connection cable (Page 67)
● Screwdriver PH1
● Slotted screwdriver with blade width 5.5 to 8 mm
NOTICE
Damage to property due to electrical voltage
Switch off the power to the 3RW5 soft starter before starting work
(main and control supply voltage).
Note
A magn
etic screwdriver simplifies disassembly.