Configuring
6.3 Configuring the 3RW5 Soft Starter
SIRIUS 3RW5 Modbus communication module
Equipment Manual, 03/2020, A5E43676481002A/RS-AC/003
75
6.3.1.2 Configuring 3RW5 soft starters with the aid of a 3RW5 HMI High Feature
This chapter describes options for configuring the 3RW5 soft starter that you require for
a 3RW5 HMI High Feature.
Requirements
● Input device (3RW5 HMI High Feature, PC)
● Switched on control supply voltage on the 3RW5 soft starter
Procedure
Programmable logic controller / Modbus TCP client, e.g. SIMATIC S7-1500
PC or programming device with configuration software of controller and Modbus TCP client
SIRIUS 3RW5 soft starter / server
PC with SIRIUS Soft Starter ES (TIA Portal)
3RW5 HMI High Feature (accessories depend on 3RW5 soft starter)
... : Steps to be taken in the procedure
To Next Page
Loading...
