EMC Law and CE Mark
© Siemens AG, 2004. All rights reserved
EMC Installation Guideline – Planning Guide (EMV) – 03.2004 Edition
10-57
Area of application
The products indicated in the declaration of conformity are designed according to
EMC for use in the industrial sector.
These products may be also used in combination with an individual licence for
emitted interference in residential areas (residential, commercial and industrial
areas, small enterprises). This individual licence may be obtained from an authority
or testing organization. In Germany, the Federal Office for Post and
Telecommunications and its branch offices acts as the grantor of this individual
licence.
Siemens products meet the following requirements:
Requirements
Area of application
Emitted interference Noise immunity
Industrial DIN EN 61000-64 or
DIN EN 61800-3
Residential area Individual licence is
required
DIN EN 61000-6-2 or
DIN EN 61800-3
Observe the guidelines
The products comply with the EMC requirements if you
1. adhere to the guidelines described in the respective product documentation for
installation and operation.
2. also consider the rules
– for the installation of the devices,
– for work performed on control cabinets and
– the notes on individual components.
3. give fundamental consideration to the relevant EMC Guidelines for these
products.
n
To Next Page
Loading...
Need help?
General