Siemens SISTORE AX4 - Quad;Seq Button; Menu Button; PTZ Button; Panic Button

Configuration
15
Siemens Building Technologies SISTORE AX4_EN.doc
Fire & Security Products 09.2004
3.1.5 Quad/Seq Button
Pressing the Quad/Seq button toggles between quad (2x2) display mode and
sequence mode. The camera button LEDs are lit while in the quad display mode,
and the Quad/Seq button LED is lit while in the sequence mode. It is also loads a
Preset View in the PTZ mode.
3.1.6 Menu Button
Pressing the Menu button enters the Main Menu. You will need to enter the
administrator password to access the Main Menu. Pressing the button again
closes the current menu or setup dialog box. It is also used to display the search
menu in the playback mode, and load the PTZ Menu in the PTZ mode.
3.1.7 PTZ Button
Pressing the PTZ button opens a Pan/Tilt/Zoom screen which allows you to control
properly configured cameras. The PTZ button LED is lit while in the PTZ mode.
In the PTZ mode, pressing the PTZ button enters the digital zoom mode, and
pressing the button again in the digital zoom mode returns to the live monitoring mode.
When a PTZ device is not installed, pressing the PTZ button enters the digital zoom mode
directly.
Pressing the PTZ button in the playback mode enters the digital zoom playback
mode.
NOTE:
When the DVR is in the PTZ mode, a white line will display around the image.
NOTE:
In the digital zoom mode and digital zoom playback mode, a bright small box is laid over the image.
The box indicates the spot to be enlarged.
3.1.8 Panic Button
Pressing the Panic button activates panic recording, so the DVR will record video
regardless of the time-lapse or event recording schedule. Press the button again
to release the panic recording.
NOTE:
When the DVR is recording video, a red dot appears on the screen. When the DVR is in the panic
recording mode, a white appears in the red dot, and the PANIC LED on the front panel is lit.
3.1.9 Enter/Pause Button
This button selects a highlighted item or completes an entry that you have made.
Pressing the Enter/Pause button in the live monitoring mode freezes the current live
screen, and the screen displays . Press the button again to return to the live
monitoring mode.
Pressing the button in the playback mode will pause the video, and the screen
displays . Pressing Enter/Pause button again in the pause mode goes to the live
monitoring mode.
In the digital zoom mode, pressing the button enlarges a specific area of the
screen. A displays on the enlarged screen..