Configuration
20
Siemens Building Technologies SISTORE AX4_EN.doc
Fire & Security Products 09.2004
Fig. 25 System Upgrade screen.
Select Start, and enter the Admin password to start the upgrade.
The system restarts automatically after completing the upgrade. The software will
start running after restarting the unit.
NOTE:
Only the system administrator can upgrade the software.
NOTE:
You cannot upgrade the software during clip copy.
You can save your changes by highlighting OK and pressing the button.
Selecting Cancel exits the screen without saving the changes.
3.5.2 Date/Time Setup
Highlight Date/Time in the Main menu and press the button. The Date/Time
setup screen appears.
Fig. 26 Date/Time setup screen.
CAUTION:
If you set a date and time that is older than some of your recorded images, any images with dates and
times later than the new setting will be deleted.
Highlight the first box beside Date/Time and press the button. The individual
sections of the date highlight. Use the arrow buttons to adjust the numbers. Once
you have the correct date, press the button.
To Next Page
Loading...
