Siemens SISTORE AX4 - Configuring Input Devices; Camera Setup Screen

Configuration
26
Siemens Building Technologies SISTORE AX4_EN.doc
Fire & Security Products 09.2004
3.6 Configuring Input Devices
You can configure the video, audio and remote control devices connected to the
DVR.
Fig. 33 Device menu screen.
3.6.1 Camera Setup Screen
Highlight Camera in the Main menu and press the button. The Camera setup
screen appears.
Fig. 34 Camera setup screen.
You can turn on or off each camera, and also hide the video of the camera number
by highlighting the camera Setup heading and pressing the button. Select the
On, Off, Covert 1 or Covert 2 from a drop down list.
NOTE:
When selecting the Covert 1, the DVR displays the camera title and status icons on the covert video.
When selecting the Covert 2, the DVR displays only camera title on the covert video.
You can assign titles to each camera by highlighting the Title heading and pressing
the button. A virtual keyboard allows you to enter camera names.
Selecting the PTZ Device box causes a list of controllable cameras to display.
Select your camera from the list and press the button. You will need to connect
the camera to the RS-485 terminal on the back of the DVR following the camera
manufacturer’s instructions.