Configuration
28
Siemens Building Technologies SISTORE AX4_EN.doc
Fire & Security Products 09.2004
3.6.3 Motion Detector
Fig. 37 Motion Detector setup screen.
Your DVR has built-in video motion detector. Video motion detector can be turned
On or Off for each camera.
Highlighting the box under the Sensitivity heading allows you to adjust the DVR’s
sensitivity to motion. There are five settings with 1 being the least sensitive and 5
being the most sensitive.
You can define the area of the image where you want to detect motion; e.g., a
doorway. Highlight the icon under the Zone heading, and press the button. The
Motion Detection Zone screen will display.
Fig. 38 Motion Detection Zone screen.
The Motion Detection Zone screen is laid over the video for the selected camera.
You can set up motion detection zones by selecting or clearing blocks. The menu
on the setup screen has the following functions:
NOTE:
You can activate or deactivate 4 cells at a time using the
button. Once 4 cells are highlight, you
can select individual cells by using the camera buttons.
Exit with save
Closes the menu after saving the changes.
Exit without save
Closes the menu without saving the changes.
To Next Page
Loading...
