Siemens SISTORE AX4 - Page 38

Configuration
38
Siemens Building Technologies SISTORE AX4_EN.doc
Fire & Security Products 09.2004
3.8.2 Alarm In Event Action (Alarm Out) Setup Screen
The DVR can be set to react to events differently by activating an internal buzzer or
external alarms.
Fig. 49 Alarm In Event Action (Alarm Out) setup screen.
Highlight the Sched box and press the button. A schedule screen appears. Set
the schedule as described earlier.
Highlight the Alarm Out box and either Beep or the alarm output terminal that you
want to associate with the sensor.
Highlight the Dwell Time box and set the length of time you want the output
activated.
3.8.3 Alarm In Event Action (Notify) Setup Screen
The DVR can be set to notify the remote site when certain events are activated.
Fig. 50 Alarm In Event Action (Notify) setup screen.
Highlight the Sched box and press the button. A schedule screen appears. Set
the schedule as described earlier.
Highlight the Notify box and press the button. This toggles between On and Off.
When it is On, the DVR notifies the remote site when certain events occur based
on a defined schedule.