Siemens SITOP UPS1600 - Page 37

Parameterizing the SITOP UPS1600
6.2 Switching off the UPS by a user program when the power fails
SITOP UPS1600 under STEP 7 V5
Getting Started,
37
4. Enter a letter "d" into the field, and select "DB160" from the window that then opens.
5. At block parameter "PN_ADDRESS", first enter "DW#16#" followed directly by the
Profinet diagnostic address of the UPS1600 in your STEP 7 project in hexadecimal form.
Example:
UPS1600 diagnostic address
8183
Hexadecimal diagnostic address 1FF7
Entry at PN_address
DW#16#1FF7