Siemens SITRANS F M MAG 5000

To Next Page

To Previous Page

The cleaning unit can be set at:

• Automatic cleaning

Set the relay output of the signal converter at cleaning.

Commissioning

Automatic cleaning

Set the required cleaning cycle time. The default value is 24 hours. Use the lock key to lock the set values.

Return to the operator menu using the top-up key. The signal converter is now set at automatic cleaning.

Technical data

Cleaning voltage

AC cleaning

DC cleaning

60 V AC

30 V DC

Cleaning period 60 s + 60 s pause period

Relay

• Load 42 V AC / 2 A; 24 V DC / 1A

Operation

• Automatic

• Manual

Switch relay activated when cleaning is in progress

Yes

Indicator lamps LEDs: “ON” and “CLEANING”

Supply voltage and power consumption 115 ... 230 V AC, +10% ... -15%, 50 ... 60 Hz, 7 VA cleaning,

5 VA stand by

11 ... 30 V DC / 11 ... 24 V A C, 50 ... 60 Hz, 7 VA cleaning,

5 VA stand by

Ambiens temperature

• During operation

• During storage

-20 ... +50°C (-4 ... +122°F)

-20 ... +70°C (-4 ... +158°F)

Electrical noise (EMC)

Enclosure

• Material

• Width

• Height

• Rating

• Mechanical load

Standard 19” insert in aluminium/steel (DIN 41494)

21 TE (4.75”)

3 HE (5.25”)

IP20 / NEMA 2 to EN 60529 and DIN 40050

1 g, 1 ... 800 Hz sinusoidal in all directions to EN 60068-2-36

Dimensions

Weight 1 kg

CENELEC Emission Emmunity

Light industry EN 50081-1

Heavy industry EN 50082-2

We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full con-

sistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Responsibility for suitability and intended use of

this instrument rests solely with the user.

Siemens Flow Instruments A/S

6430 NORDBORG

DENMARK

www.siemens.com/flowdocumentation

Order no.: 083R9148

Literature no.: SFIDK.PI.026.J3.02

*083R9148*