Installing/Mounting
4.4 Remote installation
27
3. Fit M20 or ½" NPT cable glands for cables from bottom or sides of terminal box.
4. Mount earth wire in bottom of terminal box.
Connect coil cable - keep separate from electrode cable
5. Mount connection plate in terminal box.
6. Fit coil, electrode, supply and output cables through cable glands and connect to
connection plate as shown in Electrical connection (Page 36).
7. Fix connection plate with the two diagonally opposite screws.
www.eltra-trade.com
info@eltra-trade.com
+421 552 601 099
To Next Page
Loading...
