Siemens SITRANS F M MAG 5000 - A.2 Basic settings

Menu diagrams
A.2 Basic settings
76
A.2 Basic settings
1)
The question mark at unit selections stand for customer units. The unit is shown as a question
mark on display if not overwritten with customer's own unit text setup using PDM or ordered
specially using Y20 in ordering system.
The flow rate unit can be "?/?" or show customer unit texts as for example "AcrFt/y" (Acre
feet/year).
2)
When batch is selected on digital output or relay, Totalizer 2 is not shown because it is
controlled by the batch function.
www.eltra-trade.com
info@eltra-trade.com +421 552 601 099