SITRANS FC410 flowmeter
A5E33120231-001, 12/2013 13
Step 1 - Identification
Note
The layout of the dialog boxes shown may vary according to the resolution setting for your computer monitor. The
recommended resolution is 1280 x 960.
1. Click on "Read Data from Device" to upload Quick Start parameter settings from the device to the PC/PG and ensure
PDM is synchronized with the device.
2. If required, change the language for the local user interface.
3. Click on "Next" to accept the default values. ("Descriptor", "Message", and "Date" fields can be left blank.)
Figure 5-1 Quick start step 1
Step 2 - Sensor orientation
Select the application type (gas or liquid) and sensor orientation, then click on "Next".
To Next Page
Loading...
