SITRANS FC410 flowmeter
18 A5E33120231-001, 12/2013
5. Click "Next" and then "Auto Zero Point Adjust".
6. During the process a progress bar is visible.
7. At the end of the zero adjustment, the outcome is displayed as an offset and a standard deviation.
Note
If zero point adjustment cannot be successfully performed, an alarm message will be reported in PDM. Improve your
zero point adjustment and repeat the procedure.
The system is now ready for normal operation.
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
SITRANS FC410 flowmeter
A5E33120231, 12/2013
To Next Page
Loading...
