Siemens SITRANS MAG 5100W - Remote Installation - Split Type; Electrical Connection Diagram; Seal Cable Glands

8
Order no.: A5E02451851-01
Quick Start MAG 3100 / 3100HT / 3100P / 5100W
Remote installation
CH
1
2
3
Relocation of Sensorprom. Refer to the relevant transmitter Quick Start
CH
Electrical connection (fig. 4). (A) Sensor, (B) Electrode cable, (C) Coil cable, (D) Only required for ATEX
applications!
For cable specifications see the operating manual on the enclosed CD-ROM.
Make sure cable glands are firmly sealed!
CH
5
4
CH