To Next PageTo Next Page
Need help?Do you have a question about the Siemens SITRANS MAG 6000 I and is the answer not in the manual?
General| Type | Electromagnetic flowmeter |
|---|---|
| Display | LCD with backlight |
| Nominal Diameter Range | DN 10 to DN 3000 |
| Accuracy | ±0.2% of measured value |
| Repeatability | ±0.1% of rate |
| Ambient Temperature | -40°C to +60°C |
| Output Signals | 4 to 20 mA |
| Power Supply | 24 V DC |
| Protection Class | IP68 |
| Material | Stainless steel |
| Certifications | ATEX |
| Outputs | 4 to 20 mA |
| Enclosure rating | IP68 |
Basic safety guidelines for operation and installation of the flowmeter.
Specific safety requirements for installing the device in hazardous environments.
Details about ATEX certification and conditions for safe use.
Information on FM/CSA hazardous area certifications for Zone 1.
Details on FM Class I, II, III, Div 1 hazardous area approvals.
Safety measures to consider during installation process.
Instructions for installing the flowmeter in a compact configuration.
Procedures for setting up the flowmeter in a remote configuration.
Safety guidelines related to electrical connections.
Detailed wiring diagrams and terminal connections.
Steps for connecting remote sensor and transmitter.
Specific wiring instructions for hazardous locations.
Describes operation via the device's keypad and display.
Procedure for modifying the device's password.
How to adjust fundamental operational parameters.
Details on the device's error and status logging system.
A catalog of error codes, their causes, and remedies.
A guide to diagnosing and resolving common issues.
A systematic checklist for troubleshooting the transmitter.
