Service and maintenance
9
Under ideal conditions the flowmeter will operate continuously with no manual adjustment or
intervention required.
9.1
Maintenance
The device is maintenance-free. However, a periodic inspection according to pertinent
directives and regulations must be carried out.
An inspection can include check of:
● Ambient conditions
● Seal integrity of the process connections, cable entries, and cover screws
● Reliability of power supply, lightning protection, and grounds
NOTICE
Repair and service must be carried out by Siemens authorized personnel only.
Note
Siemens defines flow sensors as non-repairable products.
9.2 Certificates
You can find certificates on the Internet at Certificates (
https://www.siemens.com/
processinstrumentation/certificates) or on an included DVD.
9.3
Technical support
If you have any technical questions about the device described in these Operating Instructions
and do not find the right answers, you can contact Customer Support:
● Via the Internet using the Support Request:
Support request (
http://www.siemens.com/automation/support-request)
●
Via Phone:
– Europe: +49 (0)911 895 7222
– America: +1 423 262 5710
– Asia-Pacific: +86 10 6475 7575
Further information about our technical support is available on the Internet at
Technical support (
http://support.automation.siemens.com/WW/view/en/16604318)
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018, A5E02083319-AH
57
To Next Page
Loading...
