Edition Remarks HW version SW version
01/2015
● Graphics,
technical data and factory settings changed
to comprise:
– "BBL42" is displayed as the default setting in
customer unit instead of "?". The unit can still be
changed.
– Improved minimum supply voltage for current
output to 12 V.
● Document revision identification changed according to
new SIEMENS standard
06 4.08 X06
09/2012
● Enhanced current output function
● Updated menu functions; possibility of showing user
defined units in display
●
Updated ATEX approval
● General update
06 4.07 X06
12/2011
● Updated ATEX approval
●
General update
04 4.07 X06
03/2011
● First edition
●
Transmitter upgrade information included
04 4.06 X06
1.4 Device identification
Inspection
1. Check for mechanical damage due to possible improper handling during shipment. All
claims for damage are to be made promptly to the carrier.
2. Make sure the scope of delivery, and the information on the namelate corresponds to the
ordering information
Introduction
1.4 Device identification
8
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018, A5E02083319-AH
To Next Page
Loading...
