Siemens SITRANS MAG 6000 I - Dimensions and Weight

Technical specifications for MAG 6000 I standard and Ex version
Cable entries (remote installation) Standard version 2 x M25 (for supply/output) and
2 x M16 (for sensor connection) or
2 x ½" NPT (for supply/output) and
2 x M16 (for sensor connection)
Ex version 2 x M20 (for supply/output) and
2 x M16 (for sensor connection)
2 x ½" NPT (for supply/output) and
2 x M16 (for sensor connection)
Communication Standard version HART, MODBUS RTU/RS485, Foundation
Fieldbus H1, DeviceNet, and PROFIBUS PA/
DP add-on modules
Ex version HART, PROFIBUS PA and Foundation Field‐
bus H1available factory-mounted
1)
Depending on sensor
2)
Only with MAG 3100 / 3100 P sensors sizes DN 15 ... DN 300 (½" ... 12") compact
11.2
Dimensions and weight
Transmitter IP67/NEMA 4X compact die cast aluminum
Figure 11-1 Transmitter dimensions shown in mm (inch)
Weight: MAG 6000 I/MAG 6000 I Ex de: 6 kg (13.5 lbs)
Technical data
11.2 Dimensions and weight
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018, A5E02083319-AH
67