Siemens SITRANS MAG 6000 I - List of Error Numbers and Remedies

8.2 List of error numbers
Error
No.
Error text
Remedy text
Comment Output
status
Input
status
1
I1 - Power on
OK Device powered on Active Active
2
I2 - Add-on module
Applied A new module has been applied to the system Active Active
3
I3 - Add-on module
Install An add-on module is defect or has been removed.
This can be an internal add-on module
Active Active
4
I4 - Param. corrected
OK A less vital parameter in the transmitter has been re‐
placed by its default value
Active Active
20
W20 - Totalizer 1
Reset manually During initialisation the check of the saved totalizer
value has failed. It is not possible to rely on the saved
totalizer value anymore. The totalizer value must be
reset manually in order to rely on future readings
Active Active
20
W20 - Totalizer 2
Reset manually During initialisation the check of the saved totalizer
value has failed. It is not possible to rely on the saved
totalizer value anymore. The totalizer value must be
reset manually in order to rely on future readings
Active Active
21
W21 - Pulse overflow
Adj. pulse settings Actual flow is too big compared with pulse width and
volume/pulse
Reduced
pulse width
Active
22
W22 - Batch timeout
Check installation Duration of batching has exceeded a predefined max‐
imum time
Batch output
on zero
Active
23
W23 - Batch overrun
Check installation Batch volume has exceeded a predefined maximum
overrun volume
Batch output
on zero
Active
24
W24 - Batch neg. flow
Check flow direction Negative flow direction during batch Active Active
30
W30 - Overflow
Adj. Q
max
Flow is above Q
max
settings Max. 120 % Active
31
W31 - Empty pipe
Pipe is empty Zero Active
40
P40 - SENSORPROM®
Insert/change SENSORPROM
®
unit not installed Active Active
41
P41 - Parameter range
Switch off and on A parameter is out of range. The parameter could not
be replaced by its default value. The error will disap‐
pear at the next power-on
Active Active
Alarm, error, and system messages
8.2 List of error numbers
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018, A5E02083319-AH
55