Siemens SITRANS MAG 6000 I - Compact Installation Procedure

Vibrations
1
Figure 4-1 Avoid strong vibrations
In installation with strong vibrations remote installation of the transmitter is recommended.
4.3
Compact installation
The flowmeter is delivered with default factory settings and start measuring the flow rate after
power-up. The SENSORPROM
®
is factory-mounted in the transmitter.
*YHUBQQ
Figure 4-2 Compact installation
Note
To avoid too high tension on small sizes MAG 1100 sensors, transmitter must be supported.
Installing/Mounting
4.3 Compact installation
24
SITRANS MAG 6000 I/6000 I Ex de
Operating Instructions, 08/2018, A5E02083319-AH