5.6 Switching on the supply voltage
Requirement
● You have connected the device correctly. (Page 31)
● The terminal voltage on the device is correct. (Page 65)
Procedure
Switch on the power supply.
● Product name and firmware version appear briefly on the display.
● The measured values are shown on the display.
For a device without a display, you read off the current output as follows:
– Over the remote control (e.g. SIMATIC PDM).
– With a DC current measuring device.
AUTOHOTSPOT
Result
The device is now ready for operation.
Commissioning
5.6 Switching on the supply voltage
SITRANS TH320/TH420/TR320/TR420/TF320/TF420
Compact Operating Instructions, 03/2018, A5E41865021-AA 57
To Next Page
Loading...
