10.3.3.2 Installing the display
Procedure
1. Connect the cable to the local display as shown in the gure.
Figure 10-1 Ensure correct polarity!
2. Fasten the local display in the holder.
3. Close the device.
Closing the device (Page 94)
10.4 Absence of pollutants
The product does not contain any dangerous substances above the concentration
value according to GB/T 26572.
10.5 Return procedure
Enclose the bill of lading, return document and decontamination certicate in a clear plastic
pouch and attach it rmly to the outside of the packaging.
Service and maintenance
10.5 Return procedure
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB 183
To Next Page
Loading...
