Home Connect en
15
o Home Connect
Home Connect
This dishwasher ist Wi-Fi capable and
can be remotely controlled via a mobile
terminal device.
If your dishwasher does not connect to
the home network, you can also operate
the dishwasher manually by pressing
the buttons.
Info button {
Info button
The Info button { can be used to
display additional programme
information.
1. Press the Info button {8.
2. Press the programme button.
Information on the selected
programme is indicated on the
display window at the top @.
3. To leave, press Info button { 8.
Setting up the App
To be able to operate the appliance via
Home Connect, the Home Connect App
must be installed on your mobile
terminal device.
Observe the supplied Home Connect
documents.
Follow the steps specified by the App to
make the settings.
Setting up Home Connect
You can set your dishwasher by
pressing the remote start button }h
or proceed as follows:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button {8 for 3
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4. Keep pressing button >)R until the
required setting is indicated on the
display window at the top @.
5. Make the setting with setting buttons
+ -X.
6. Press and hold the Info button {
8 for 3 seconds.
The chosen setting has now been
stored.
Wi-Fi |
Wi-Fi
In the Wi-Fi menu you can activate the
wireless network connection with “on”
and deactivate it with “off”.
Notes
■ If you have selected the Wi-Fi “off”
setting, the “Network login” and
“Connect to App” settings are not
available.
■ Remote control of the appliance
requires a stable wireless network
connection.
:L)L
!
RQ
To Next Page
Loading...
Need help?
General
