en Cleaning and maintenance
38
Terminating the programme
(Reset)
Terminating the programme
1. Open the door.
2. Press the START button )* and
hold for 3 seconds
The display window at the top @
and the front display * )2 show:
"Program was terminated".
3. Close the door.
The programme sequence lasts
approx. 1 min. The display window
at the top @ shows: “Finished”.
4. Open the door.
5. Switch off ON/OFF switch (.
6. Close the door.
* depending on the features of your
dishwasher
Changing the programme
When the START button )* has been
pressed, the programme cannot be
changed. The only way a programme
can be changed is by Cancel
programme (Reset).
2 Cleaning and
maintenance
Cleaning and maintenance
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
problems.
Overall condition
of the machine
■ Check rinsing compartment
for grease and limescale deposits.
If you find such deposits:
■ Fill detergent dispenser 9: with
detergent. Start the appliance
without utensils in the programme
with the highest rinsing temperature.
:Warning
Health hazard due to detergents
containing chlorine!
Always use chlorine-free detergents.
Clean the appliance with
detergents/appliance cleaners which
are particularly suitable for use with
dishwashers.
■ To extend the life of your appliance,
clean the appliance regularly with a
special dishwasher detergent.
■ To ensure that the door seal always
remains clean and hygienic,
regularly clean it with a damp cloth
and a little washing-up liquid.
■ If the appliance is switched off for a
prolonged period, leave the door
ajar to prevent the formation of an
unpleasant odour.
To Next Page
Loading...
Need help?
General
