1 In the Patient Model Dialog, move the mouse over the desired
body region (for example, AbdomenRoutine) or one of the
predefined categories (for example, Cardiac protocols).
2 Click the button that represents the correct patient position (for
example, Head First - Supine).
3 Click OK.
The scan protocol is loaded into Chronicle. Chronicle is a list of
examination steps. It controls the entire examination procedure.
Preparing an examination
4
SOMATOM Emotion |
syngo
CT VC50
Print No. HC-C2-025.626.01.01.02
29
To Next Page
Loading...
