2 On the Scan sub-task card, select the API language in the
Language list, if necessary. In the API list, select the name of the
API recording.
3 Make sure the API button on the lower-left side of the
Examination task card is clicked.
The API button controls whether your selected API recordings are
played in an examination.
Acquiring tomograms
Tomograms are the cross-sectional views of a body region.
Tomograms are used for diagnosis, typically in either spiral or
sequence scan mode.
1 In Chronicle, select a tomo entry (for example, AbdRoutine) and
check corresponding examination parameters on sub-task cards.
2 Click Load.
5.4
Performing an examination 5
SOMATOM Emotion |
syngo
CT VC50
Print No. HC-C2-025.626.01.01.02
39
To Next Page
Loading...
