Troubleshooting
Disturbance Cause
and troubleshooting
Traces of rust on surfaces
plug.
Cutlery is
not sufficiently rust-resistant. Knife blades
are often more severely affected.
▶ Use rust-resistant dishes.
Cutlery
also rusts if rusting parts are washed with it.
▶ Do not
wash rusty parts.
Salt content in the rinse water is too high.
1.Remove
any spilled special salt from the rinsing
container.
2.
Tighten the cap of the special salt container tightly.
There are cleaning residues
in the detergent
chamber or in the
tab collecting tray.
Spray arms were blocked by crockery and the
detergent was not rinsed out.
▶ Make
sure the spray arms are not blocked and
can rotate freely.
The detergent chamber was damp when the detergent was
filled.
▶ Only
pour cleaner into a dry cleaner chamber.
Refill indicator for
Special salt lights up.
Special salt is missing.
▶
Fill with special salt →
Page 27
a.
Sensor
does not recognize special salt tablets.
▶ Do
not use special salt tablets.
51
To Next Page
Loading...
Need help?
General
