Siemens TIA Portal V14 - SINAMICS V90 PN Demo Case; 9.1 Overview of the demo case; 9.1.1 Configuration of the case

9 "SINAMICS V90 PN” Demo Case
9.1 Overview of the demo case
TOs of S7-1500(T)
Entry ID: 109743134, V1.0, 05/2017
54
 Siemens AG 2017 All rights reserved
9 "SINAMICS V90 PN” Demo Case
9.1 Overview of the demo case
9.1.1 Configuration of the case
The "SINAMICS V90 PN” demo case consists of two SINAMICS V90 drives with
the appropriate servo motors, one SIMATIC-CPU 1515T-2 PN and the ET 200SP
distributed I/O system with the respective operating elements, such as, toggle
switches, potentiometers and an emergency stop button.
Figure 9-1 "SINAMICS V90 PN” demo case
The ET 200SP distributed I/O is configured with the following modules:
 Digital inputs DI 16x24V DC
 Digital outputs DQ 16x24V DC / 0.5A
 TM Timer DIDQ 10x24V technology module
 AI 2xU analog inputs
9.1.2 Control elements
The modules of the ET 200SP distributed I/O system are connected to the demo
case with different operating and display elements, which can be used for
demonstrations:
 Toggle switch to operate the digital inputs
 LEDs to signal the digital outputs