EasyManua.ls Logo

Siemens TQ505DF8 - Dispensing Coffee Drinks with Milk Froth; Dispensing Milk Froth; Dispensing Special Drinks

Siemens TQ505DF8
196 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Basic operation en
57
4. Insert the milk container on the left
of the appliance.
a The milk container will click into
place.
Tip
Fold open the lid of the milk con-
tainer, so more milk can be poured in
while the drink is being dispensed.
Dispensing coffee drinks with
milk froth
Requirements
¡ The milk container has been con-
nected.
¡ The milk container has been filled
with milk.
1. Place your pre-warmed cup under
the outlet system.
2. Press the symbol for a coffee drink
with milk.
a The display will show the drink and
your current settings.
→"Drink settings", Page58
3. Change the settings where neces-
sary:
Use to adjust the amount.
→"Adjusting the amount",
Page59
Use to adjust the coffee
strength.
→"Adjusting the coffee
strength", Page58
Use the ground coffee compart-
ment.
→"Dispensing a coffee drink
made from ground coffee",
Page55
4. Press and wait until the process
is complete.
After preparing the drink, the milk
system will automatically clean it-
self with a short jet of steam.
Tip:If you want to stop the dispens-
ing process early, press . If you
want to stop the dispensing process
altogether, press ⁠.
Dispensing special drinks
Your appliance has other drinks be-
sides the ones that you can obtain
via the quick-selection buttons.
Press several times.
→"Drinks overview", Page51
Dispensing milk froth
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
Never touch the milk system when
it is hot.
Allow the hot milk system to cool
down before touching it.
Requirements
¡ The milk container has been con-
nected.
¡ The milk container has been filled
with milk.
1. Place your pre-warmed cup under
the outlet system.
2. Press repeatedly until the dis-
play shows "Milk froth".
3. Change the setting if necessary:

Table of Contents

Related product manuals