EasyManua.ls Logo

Siemens TQ505DF8 - Activating the Childproof Lock; Childproof Lock; Deactivating the Childproof Lock

Siemens TQ505DF8
196 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en Childproof lock
60
Inserting and activating the
water filter
ATTENTION!
Possible damage to the appliance
due to limescale build-up.
Change the water filter in good
time.
Change the water filter after
2months at the latest.
Note:If "Replace water filter" is
shown on the display, replace the
water filter.
If you are not inserting a new filter,
select "No filter" and follow the in-
structions on the display.
1. Immerse the water filter in a glass
of water and press the sides to-
gether lightly until no more air
bubbles rise to the surface.
→Fig.
3
2. Press ⁠.
3. Use or to select "Water fil-
ter" and press ⁠.
4. Use or to select "New fil-
ter" or "Replace water filter" and
press ⁠.
5. Note:If you are not inserting a new
filter, select "No filter" in the menu
settings.
Push the water filter firmly into the
water tank and press ⁠.
→Fig.
4
6. Fill the water tank up to the "max"
mark and press ⁠.
7. Remove the milk container on the
left of the appliance.
8. Place a container with a capacity
of 1litre under the outlet system
and press ⁠.
a The filter will be rinsed and the fol-
lowing message displayed: "Rins-
ing complete.".
a The appliance is ready to use.
Tips
¡ You should also change your wa-
ter filter for reasons of hygiene.
¡ With a water filter you need to de-
scale your appliance less fre-
quently.
¡ If your appliance has not been
used for a long time, for example if
you were on holiday, you should
rinse the water filter before use by
dispensing a cup of hot water.
¡ The water filter can be purchased
from retailers or customer service.
→"Accessories", Page52
¡ Learn how to insert the water filter.
→"Inserting and activating the wa-
ter filter", Page60
Childproof lock
Childproof lock
You can lock the appliance, to pro-
tect children against scalding and
burns.
Activating the childproof lock
Press and hold for at least
3seconds.
a The following message will be dis-
played: "Child lock active. To deac-
tivate press "ml" for 3 sec".
Deactivating the childproof lock
Press and hold for at least
3seconds.
a The following message will be dis-
played: "Child lock deactivated.".

Table of Contents

Related product manuals