Siemens TQ505DF8 - Cleaning Brewing Unit; Cleaning the Milk Container

Cleaning and servicing en
65
8. Any detergent residues in the milk
system must be completely re-
moved following the rinsing pro-
cess.
9. Assemble the milk system's com-
ponents.
→Fig.
13
10.Slide the outlet system right down.
11.Slide the white adapter in on the
left and insert the milk system into
the appliance from the front, mak-
ing sure it is straight.
→Fig.
14
12.Fasten the cover at the top and
swivel it downwards.
→Fig.
15
a The cover will click into place.
13.Slide the outlet system all the way
up.
→Fig.
16
14.Clean and insert the milk con-
tainer.
Cleaning the milk container
Clean the milk container regularly for
reasons of hygiene. You can clean
the milk container in the dishwasher.
1. Remove the milk container.
→Fig.
17
2. Remove the lid.
→Fig.
18
3. Remove the milk tube and dis-
mantle.
→Fig.
19
4. Clean all the milk container's com-
ponents.
5. Install all components.
Tip
Press the adapter piece firmly into
the holder in the milk container.
Cleaning brewing unit
In addition to the automatic rinsing
process, regularly remove and clean
the brewing unit.
WARNING
Risk of burns!
Some parts of the appliance become
very hot.
▶
Never touch hot appliance parts.
▶
Allow hot appliance parts to cool
down before touching them.
ATTENTION!
The appliance may be damaged by
improper cleaning.
▶
Do not use washing-up liquid.
▶
Do not use cleaning agents con-
taining vinegar or acids.
▶
Do not clean in the dishwasher.
1. Press to switch the appliance
off.
2. Open the door of the brewing
chamber.
→Fig.
20
3. Remove the drip tray with the cof-
fee dregs container.
→Fig.
21
4. Push the red lever upwards.
5. Hold the brewing unit by the
handle and carefully pull forwards
and out.
→Fig.
22