94
TUTORBIT
COSMOGAS
6 - USE
Parameter Description
Access
level
Adjustment
range
Default value
Custom
value
Zone3 pump Same menu as for “Tank pump”
Installer
Zone4 pump Same menu as for “Tank pump”
Installer
Zone5 pump Same menu as for “Tank pump”
Installer
Zone6 pump Same menu as for “Tank pump”
Installer
3 way valve zone1 Visible only if Conguration>Zones>3way valve n>Type of Zone=Mix.
Installer
Manual control Manual or automatic control of the relay
Installer
Off; On; Auto;
Percentage
value;
Auto
Actual value
Installer Value Value
Error Possible output error
Installer Value Value
3 way valve zone2 Same menu as for “3 way valve zone1”. Visible only if Conguration>Zones>3way valve n>Type of Zone=Mix.
Installer
3 way valve zone3 Same menu as for “3 way valve zone1”. Visible only if Conguration>Zones>3way valve n>Type of Zone=Mix.
Installer
3 way valve zone4 Same menu as for “3 way valve zone1”. Visible only if Conguration>Zones>3way valve n>Type of Zone=Mix.
Installer
3 way valve zone5 Same menu as for “3 way valve zone1”. Visible only if Conguration>Zones>3way valve n>Type of Zone=Mix.
Installer
3 way valve zone6 Same menu as for “3 way valve zone1”. Visible only if Conguration>Zones>3way valve n>Type of Zone=Mix.
Installer
Solar Pump Same menu as for “Tank pump”
Installer
Alarm Output Same menu as for “Tank pump”
Installer
Shufe pump Same menu as for “Tank pump”
Installer
Q1_Pdc Same menu as for “Tank pump”
Installer
Q2_Pdc Same menu as for “Tank pump”
Installer
Q3_Pdc Same menu as for “Tank pump”
Installer
Q4_Pdc Same menu as for “Tank pump”
Installer
Inputs
Installer
Circuit 1 RT
Installer
Manual Passive = Automatic reception of the opening or closure contact; Active = Manual setting of the contact using
the next parameter
Installer
Active;
Passive;
Passive
Actual value Reading of the contact state or contact state setting if the previous parameter is set as “Active”
Installer
Active;
Passive;
Passive
Error Input error
Installer Value Value
Continued on the next page
To Next Page
Loading...
