Siemens AG SPL5-330.814.01.05.02 UROSKOP ACCESS
08.05 CS PS 24
Urodynamic interface 7
Page 7 of 18
Medical Solutions
3-
2Urodynam ic interfa ce
Urodynamic Interface/Scan Converter 0
The following installation and start-up instructions describe the installation and program-
ming of the urodynamic option. Part number 57 56 098 (retrofit scan converter kit) is
required for an endoscopy interface. Otherwise part number 57 56 494 (optical isolation
amplifier) and part number 57 56 452 (urodynamic interface) are required.
• Prior to beginning work, check the completeness of the retrofit kits according to the fol-
lowing setup.
Retrofit scan converter kit, part number 57 56 098 0
Scan converter 0
NOTE
There are two types of scan converter, which differ in the color of
the housing and in the type designation:
- Corioscan Pro S;
- TVone CS-500A.
Both have the same part number, 30 84 134, since they are techni-
cally identical.
The parameter “CSync In Fr“ in the model TVone CS-500A can no
longer be selected and configured.
Upgrade kit, optical isolation amplifier (OTV; part no. 57 56 494) 0
Number Part number Description
1 30 84 134 Scan converter
1 75 57 526 Scan converter connection cable
1 30 79 035 SVGA cable, 3,000 mm (5 BNC, 15 pol. SUB-D HD)
1 30 65 844 SVGA cable, 2,000 mm (5 BNC, 15 pol. SUB-D HD)
1 30 89 497 SVGA cable, 3,000 mm (2 BNC, 15 pol. SUB-D HD)
1 37 95 239 BNC video cable (or S-video adapter)
Number Part numer Description
1 46 72 028 OTV80M2
1 75 58 518 OTV power cable
2 37 95 239 BNC video cable
To Next Page
Loading...
