NLDetergent and fabric care product
¡Laundry folded in
do the drum
1.Turn the program selector and set
it to the desired programme.
→
"Programs", page 25
2.Adjust the program settings if
desired.
→
"Adjust program settings", page
30
12 Detergent and fabric
means of care
Information from the manufacturer about
use and dosage can be found on the
packaging.
13.3 Adjust program settings
Comments
¡when using liquid detergent
parts only use self-flowing liquid
detergents ¡various liquid
detergents
do not mix
¡detergent and fabric softener
to blend
¡No too long stored and strong in-
using thickened products. ¡do not
use solvent-containing
the, corrosive or gaseous agents
¡Use dyes in moderation,
salt can affect stainless steel
¡no bleach in the appliance
use ready
Required:A program is set.
→
"Set program", page 30
▶ Adjust the program settings.
→
"Buttons", page 24
Remark:The program settings are not
permanently saved for the program.
13.4 Filling the drum with
laundry
Remark:To avoid creasing, please
observe the maximum load of the
programs.
→
"Programs", page 25
B1operation 3 The Operation in es-
sentie
Requirements
¡The laundry is prepared and
sorted.
→
"Laundry", page 29
¡The drum is empty.
Service
13.1 Switching on the device
Required:The device is set up and
connected correctly.
→
"Setup and connection",
page 13
1.Open the door.
2.Place the laundry in the drum.
3.Close the door.
▶ Set the program selector to a
programme.
Make sure that no small items of
laundry are caught in the door.
13.2 Set program
30
To Next Page
Loading...
